Thursday, April 7, 2011

Roof Update

 
The South face is finished!
The roof we selected is a metal roof called "snap-lock" roofing. Basically it's 16" wide panels that snap down tight to one another. So you put the first piece in, and fasten it with some screws along one side, and the next piece snaps onto a little ridge seam so that the new piece covers the screws of the last piece. The idea is that when you're done, the whole roof has no exposed screws anywhere. The only exposed fasteners are a few rivits on the ridge piece at the top, and they're located where even if they fail they'll leak water onto the top of the roof panels. I've discovered that I love this system: the panels snap together very easily but very securely, and there's nowhere for water to find a way in. The only difficult part of installing the panels is that you have to make several cuts and folds at the bottom edge so that the panel can fold over a cleat and have a nice seal with the adjacent panel.

Metal roofs can be ordered painted or have a galvalum finish, which is slightly cheaper but doesn't weather quite as well, and can be blinding when the sun hits it just so. We didn't want to have motorists cursing us every day around 10am when our roof will reflect sunlight up Chestnut Street. So we considered a very striking white, and were sort of enthralled for a day or two with the idea of a brilliant white roof, but ultimately went for a less bold but very handsome light gray color.



Our custom fabricated gutter outlet, made from scraps left over from the rake flashing
Chris helped get the rake trim on, and then we did the eaves and the gutters. We're going to have rain chains instead of downspouts, so we made sure to put a sturdy gutter strap right over the holes we cut into the ends of the gutters. We also used some leftover scrap metal to fabricate some nice looking outlets to make the transition from the gutter to the rain chains, and prevent water from dribbling across the underside of the gutter.

Moving the next panel into position
I work the folded bottom edge onto a cleat while Chris tugs and jiggles the panel in a helpful manner
P.S. We finally spent a night in the new house! The sleeping porch is designed to capture the breezes from the South and make a cool comfortable space during the hot nights, and it works perfectly. Our cats were freaking out with the excitement of the jobsite camping trip... Oliver discovered that metal roofs are slippery when damp and would have fallen about 25 feet if the gutter didn't catch him. I had to climb to the top of the roof and coax him along the gutter to where there was an easier way up. Trinity and I slept great. (Although I had to fall asleep to the sound of all the neighbors running their a.c. units, cooling off their houses from the trapped daytime heat.)
Trinity and Major Tom enjoying a Sunday morning snooze on the sleeping porch

1 comment:

  1. There's nothing like an early morning nap at Sunday, eh? Well, looks like work on the roof is fine so far. It's also great that you've settled on a system that you like.

    -Galliena Gornet

    ReplyDelete